电极超声振动复合混粉电火花加工试验研究
DOI:
作者:
作者单位:

中北大学机械工程学院

作者简介:

通讯作者:

中图分类号:

TG661

基金项目:

国家自然科学基金(51275490),山西省自然科学基金(201601D011061)


Experimental Study on Electrode Ultrasonic Vibr Composite Powder EDM
Author:
Affiliation:

Mechanical Engineering Department, North University of China

Fund Project:

National Natural Science Foundation of China (51275490), Shanxi Natural Science Foundation (201601D011061)

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了探究工具电极超声振动在混粉电火花加工中的作用,设计了一套可调谐振频率的工具电极超声振动装置。用TC4合金作为工件材料,工件去除率和表面粗糙度作为指标,分别实施了常规混粉电火花加工和超声混粉电火花加工正交试验,通过极差和方差对试验结果进行分析。结果表明,工具电极超声振动能加快粉末颗粒在加工间隙的流动性从而避免粉末颗粒沉积引起的短路和拉弧放电,提高了加工的稳定性,去除率比常规混粉电火花加工提高了30%,表面粗糙度也有所改善。

    Abstract:

    In order to explore the role of ultrasonic vibration of tool electrode in powdered EDM, a set of tool electrode ultrasonic vibration device with adjustable resonant frequency was designed. Using TC4 alloy as the workpiece material, workpiece removal rate and surface roughness as indicators, the conventional mixed powder EDM and ultrasonic mixed powder EDM orthogonal test were carried out, and the test results were analyzed by the range and variance. The results show that the ultrasonic vibration of the tool electrode can accelerate the fluidity of the powder particles in the machining gap to avoid the short circuit and arc discharge caused by the deposition of powder particles, improve the stability of the processing, and the removal rate is increased by 30% compared with the conventional powder EDM. The surface roughness has also improved.

    参考文献
    相似文献
    引证文献
引用本文

赵玉田,邵云鹏,祝锡晶,等. 电极超声振动复合混粉电火花加工试验研究[J]. 科学技术与工程, 2019, 19(28): 110-115.
赵玉田,,zhu xi jing, et al. Experimental Study on Electrode Ultrasonic Vibr Composite Powder EDM[J]. Science Technology and Engineering,2019,19(28):110-115.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2019-03-03
  • 最后修改日期:2019-04-20
  • 录用日期:2019-05-07
  • 在线发布日期: 2019-11-20
  • 出版日期:
×
律回春渐,新元肇启|《科学技术与工程》编辑部恭祝新岁!
亟待确认版面费归属稿件,敬请作者关注