短路电流法和变步长电导增量法结合的MPPT算法
DOI:
作者:
作者单位:

长春工程学院电气与信息工程学院

作者简介:

通讯作者:

中图分类号:

TK513

基金项目:

吉林省自然科学基金(20170101119JC)


Short-Current Combined with Variable Step Size INC Maximum Power Point Tracking Method for Photovoltaic Power Systems
Author:
Affiliation:

Changchun Institute of Technology, School of Electrical Engineering and Information Technology

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    最大功率跟踪技术被广泛的应用于光伏发电系统,从而使光伏阵列在阳光的照射下发出最大功率。变步长电导增量法因为易于应用且跟踪精度较高而被广泛采用,然而传统的变步长电导增量法在响应时间和功率振荡方面还存在一定的缺陷,本文提出了一种新颖的短路电流法与变步长电导增量法结合的算法,实验结果表明,采用新算法的光伏发电系统的稳态特征和暂态特性都表现优异。

    Abstract:

    Maximum power point tracking (MPPT) techniques are widely applied in photovoltaic (PV) systems to make PV array generate peak power which depends on solar irradiation. The variable step size incremental conductance (INC) method is widely employed due to easy implementation and high tracking accuracy. Nevertheless, there are drawbacks in conventional variable step size INC method between time response and power oscillation. A novel short-current combined with variable step size INC method is introduced, experimental results show that the PV generation system has good steady state and transient characteristics with the proposed MPPT control method.

    参考文献
    相似文献
    引证文献
引用本文

刘洋. 短路电流法和变步长电导增量法结合的MPPT算法[J]. 科学技术与工程, 2018, 18(13): .
Liu Yang. Short-Current Combined with Variable Step Size INC Maximum Power Point Tracking Method for Photovoltaic Power Systems[J]. Science Technology and Engineering,2018,18(13).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2017-09-21
  • 最后修改日期:2018-01-14
  • 录用日期:2018-01-23
  • 在线发布日期: 2018-05-10
  • 出版日期:
×
律回春渐,新元肇启|《科学技术与工程》编辑部恭祝新岁!
亟待确认版面费归属稿件,敬请作者关注