一体化热防护系统试验与数值分析研究
DOI:
作者:
作者单位:

中国飞机强度研究所,中国飞机强度研究所,西安交通大学航天航空学院

作者简介:

通讯作者:

中图分类号:

V214.8

基金项目:

航空科学基金资助项目(2016ZA23003)


Experimental and numerical analysis of integrated thermal protection system
Author:
Affiliation:

Aircraft Strength Research Institute of China,Aircraft Strength Research Institute of China,School of Aero-space Xi’an Jiaotong University

Fund Project:

Aeronautical Science Foundation of China(2016ZA23003)

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    陶瓷盖板式一体化热防护系统(Integral Thermal Protection Systems)具有多层结构,材料物理性能差异大,其表面承受气动热和气动压力的共同作用,同时在外边界还具有辐射、对流换热等。提出在ITPS表面同时施加温度和力载荷方法,应用数值分析方法给出最佳的力加载区域,最后对试验结果与数值分析结果进行比较,二者误差在8%以内。对于ITPS的结构优化设计具有较好的理论参考价值。

    Abstract:

    Ceramic plate type integral thermal protection system with multilayer structure(IPTS), the difference of physical properties of the materials, the bearing surface aerodynamic interaction of thermal and pneumatic pressure, while the outer boundary is radiation and convection heat transfer. In this paper, the method of temperature and force loading is put forward on the surface of ITPS, and the optimum loading area is given by numerical analysis method. Finally, the experimental results are compared with the results of numerical analysis, and the two errors are less than 8%. It has a good theoretical reference value for the structural optimization design of ITPS.

    参考文献
    相似文献
    引证文献
引用本文

杨志斌,王琦,李丽霞. 一体化热防护系统试验与数值分析研究[J]. 科学技术与工程, 2017, 17(35): .
YANG Zhibin, WANG Qi, LI Lixia. Experimental and numerical analysis of integrated thermal protection system[J]. Science Technology and Engineering,2017,17(35).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2017-04-27
  • 最后修改日期:2017-04-27
  • 录用日期:2017-07-21
  • 在线发布日期: 2017-12-27
  • 出版日期:
×
律回春渐,新元肇启|《科学技术与工程》编辑部恭祝新岁!
亟待确认版面费归属稿件,敬请作者关注