利用断层影像法精确描述复杂断裂
DOI:
作者:
作者单位:

中石化胜利油田分公司物探研究院,中石化胜利油田分公司物探研究院

作者简介:

通讯作者:

中图分类号:

TE121.2

基金项目:

国家“十二五”科技重大专项“渤中凹陷油气成藏规律及勘探方向研究” (2011ZX05023-001-013)资助项目


A fault projection method for the complex faulted system description
Author:
Affiliation:

Geophysical Research Institute,Shengli Oilfield Company,SINOPEC;Dongying 257022,China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    目前基于三维地震的构造描述方法已经相对成熟,特别是利用相干数据体进行断层识别具有方法直观、效率高的特点。但当断层面小角度相交时,断层形态和组合就变得复杂,利用上述常规方法很难准确识别,从而影响构造圈闭评价。本文从断层面的几何形态入手,结合断面与地层面、剖面交线及投影的关系,运用解析几何方法分析其几何特征,明确在断层面小角度相交时,斜交断层的剖面容易识别断层间的关系,断层的形态与其平面投影相似,结合断面闭合的断层影像法,可有效判定断层走向、形态及断层间的组合关系。在青东地区,利用研究的方法解决了复杂构造描述问题。

    Abstract:

    3D seismic structure description method is relatively perfect at present, especially the method of coherent data volume could be used to identify fault visually and quickly. But complex faults could not be identified accurately, especially their combination in plane by conventional fault description method when faults intersect in small angle, as a result the structure evaluation be affected greatly. Geometry characteristics of fault interfaces are analyzed by using analytic geometry method combining with relationships of lines resulting from faults intersecting horizon and seismic section with their projection. The results show that the relationships among faults can be identified easily through crossing obliquely seismic section when faults intersect each other in small angle. The geometry of fault is similar to its projection in the plane, so the faults’ strike, geometry and their composites could be determined effectively combining with tomographic image of section closure. The method is applied to solve complex structure description in Qingdong area successfully.

    参考文献
    相似文献
    引证文献
引用本文

张明振,樊明. 利用断层影像法精确描述复杂断裂[J]. 科学技术与工程, 2017, 17(25): .
Zhang Mingzhen, Fan Ming. A fault projection method for the complex faulted system description[J]. Science Technology and Engineering,2017,17(25).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2017-01-19
  • 最后修改日期:2017-04-22
  • 录用日期:2017-05-05
  • 在线发布日期: 2017-09-13
  • 出版日期:
×
律回春渐,新元肇启|《科学技术与工程》编辑部恭祝新岁!
亟待确认版面费归属稿件,敬请作者关注