烟火药水下燃烧高温残渣气泡的动力学模型
DOI:
作者:
作者单位:

武装警察部队工程大学,武装警察部队工程大学,武装警察部队工程大学

作者简介:

通讯作者:

中图分类号:

TJ530

基金项目:

烟火药水下燃烧高温粒子产物的声辐射机理及特性研究(51506222);国家自然科学基金项目(面上项目,重点项目,重大项目)


Dynamic Model of Bubble induced by the Interaction between Pyrotechnic Composition Combustion Residue and water
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为研究烟火药水下燃烧高温残渣与水作用形成的气泡动力学特性,建立了传热、传质数学模型,推导了单个高温残渣气泡的生成模型,计算了生成气泡的半径以及半径的变化率与时间的关系,将计算结果与文献结果进行了比较,并分析了高温颗粒特性对气泡动力学的影响。结果表明,随着时间增加,高温残渣颗粒不断冷却,气泡半径不断增大,但增长速度不断变慢,计算结果与文献结果吻合较好。

    Abstract:

    In order to investigate the dynamic characteristics of a bubble induced by the interaction between a hot residue and water from the underwater combustion of pyrotechnic composition, the heat transfer and mass transfer model of a bubble containing a hot residue is established. The bubble radius and its growth rate are calculated, and bubble radius calculated and the literature results were compared, effects of the hot residue characteristics on bubble dynamics are analyzed. Results show that with the high temperature residue continuous cooling,although bubble radius increases constantly, growth rate becomes slowly, and the calculated results agree well with literature.

    参考文献
    相似文献
    引证文献
引用本文

蒋贤沛,郭三学,欧阳的华. 烟火药水下燃烧高温残渣气泡的动力学模型[J]. 科学技术与工程, 2016, 16(25): .
蒋贤沛, and. Dynamic Model of Bubble induced by the Interaction between Pyrotechnic Composition Combustion Residue and water[J]. Science Technology and Engineering,2016,16(25).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2016-04-11
  • 最后修改日期:2016-05-13
  • 录用日期:2016-06-13
  • 在线发布日期: 2016-09-09
  • 出版日期:
×
律回春渐,新元肇启|《科学技术与工程》编辑部恭祝新岁!
亟待确认版面费归属稿件,敬请作者关注