基于半监督聚类的MQAM信号盲识别算法研究
DOI:
作者:
作者单位:

郑州大学信息工程学院,郑州大学信息工程学院,郑州大学信息工程学院,郑州大学信息工程学院

作者简介:

通讯作者:

中图分类号:

TN911.23

基金项目:

国家自然科学基金项目(面上项目,重点项目,重大项目);中国博士后科学基金;河南省博士后基金资助项目;河南省青年骨干教师资助项目


Research on blind identification of MQAM signal based on semi supervised clustering algorithm
Author:
Affiliation:

School of Information Engineering, Zhengzhou University,School of Information Engineering, Zhengzhou University,School of Information Engineering, Zhengzhou University

Fund Project:

The National Natural Science Foundation of China (General Program, Key Program, Major Research Plan);China Postdoctoral Science Foundation

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    传统的聚类算法用在MQAM(Multilevel Quadrature Amplitude Modulation,多进制正交幅度调制 )信号的调制识别中,算法的迭代次数多,特别对高阶调制信号运算时间长。针对此问题,本文提出了一种半监督聚类重构星座图的方法,由自适应减法聚类确定初始聚类中心,在其周围标记部分样本点并赋予初始隶属度值fik,根据标记的样本点数目确定可信度参数α的值。用fik和α来监督隶属度和聚类中心的更新,误差平方和函数迭代次数减少1/2。接收端识别时,提出基于星座图圆半径的调制识别方式,该方法能很好应对初始聚类中心数目不准确的情况,不需要进行聚类中心的合并与分裂。通过提取接收端星座图的特征参数R并与标准参数Rs进行比较,实现对MQAM信号调制方式的识别。仿真结果表明运算时间是传统聚类算法的1/3,对4~256QAM信号的调制方式识别率在93%以上。

    Abstract:

    Traditional clustering algorithms were used in MQAM (Multilevel Quadrature Amplitude Modulation) modulation recognition of signals; the number of iterations is more, particularly to the high-order modulation signals. To solve this problem, this paper presents a method of semi-supervised clustering to reconstruct constellation diagram. The initial clustering centers are determined by the subtractive clustering adaptive. Around them marking part of the sample point and given membership value fik, determining the value of parameter α of credibility labeled according to the number of sample points. With fik and α to monitor and update the membership of the cluster center, iterations of squared error function reduced by 1/2. When identifying at the receiving end, put forward the modulation recognition method based on constellation radius. The method can cope with the number of initial cluster centers inaccurate well, no need to merge with or split cluster centers. At the receiving end, extracting characteristic parameters R and compared with the standard parameters Rs, achieving the recognition of MQAM signal modulation. Simulation results show that the computation time is 1/3 of the traditional clustering algorithms, the modulation recognition rate of 4~256QAM signals over 93%.

    参考文献
    相似文献
    引证文献
引用本文

李苹苹,孙钢灿,申金媛,等. 基于半监督聚类的MQAM信号盲识别算法研究[J]. 科学技术与工程, 2014, 14(22): .
lipingping,, and. Research on blind identification of MQAM signal based on semi supervised clustering algorithm[J]. Science Technology and Engineering,2014,14(22).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2014-03-04
  • 最后修改日期:2014-04-02
  • 录用日期:2014-04-16
  • 在线发布日期: 2014-08-15
  • 出版日期:
×
律回春渐,新元肇启|《科学技术与工程》编辑部恭祝新岁!
亟待确认版面费归属稿件,敬请作者关注