单层铺砂条件下支撑剂嵌入深度对裂缝导流能力影响实验研究
DOI:
作者:
作者单位:

成都理工大学能源学院,成都理工大学能源学院,成都理工大学能源学院,成都理工大学能源学院,成都理工大学能源学院,成都理工大学能源学院,中海石油中国有限公司湛江分公司研究院

作者简介:

通讯作者:

中图分类号:

TE357.1

基金项目:


Under the condition of single sanding closure pressure affecting proppant embed depth study
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在支撑剂嵌入深度对裂缝导流能力影响实验中,主要研究了裂缝闭合应力对支撑剂嵌入深度的影响和支撑剂嵌入深度对裂缝导流能力的影响。研究发现,支撑剂嵌入深度随着闭合压力的增大而增大,但并不遵循线性关系,当闭合压力大于25Mpa时,嵌入深度与闭合压力呈直线关系。单层铺砂浓度下,裂缝导流能力随嵌入深度的变化非常明显,趋近于线性变化,对压力较为敏感。文中还建立了支撑剂嵌入深度对裂缝导流能力影响的定量计算模型,可以用来预测支撑裂缝的导流能力,对现场压裂有一定的指导意义。

    Abstract:

    Effect on fracture diverting capacity in proppant embed depth experiments, mainly on fracture closure stress of proppant embedded depth and the influence of proppant embed depth influence of the harm of diverting capacity etc detailed research. The study found that the proppant embed depth increases with the increase of closure pressure, but it does not follow the linear relationship, when closing pressure is greater than 25 mpa, embedded depth and pressure relationship is linear. Influenced by lithology of proppant embed, core young"s modulus, the greater the degree of its embedded is smaller. Single sanding concentration, the fracture diverting capacity is very obvious, along with the change of embedding depth of approximating linear change, sensitive to stress. This paper has also established proppant embed depth of fracture diverting capacity quantitative calculation model of shadow, support can be used to predict fracture diverting capacity, to field fracturing has certain guiding significance.

    参考文献
    相似文献
    引证文献
引用本文

胡智凡,卢渊,伊向艺,等. 单层铺砂条件下支撑剂嵌入深度对裂缝导流能力影响实验研究[J]. 科学技术与工程, 2014, 14(5): .
huzhifan, luyuan, yixiangyi, et al. Under the condition of single sanding closure pressure affecting proppant embed depth study[J]. Science Technology and Engineering,2014,14(5).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2013-09-10
  • 最后修改日期:2013-10-08
  • 录用日期:2013-10-23
  • 在线发布日期: 2014-02-28
  • 出版日期:
×
律回春渐,新元肇启|《科学技术与工程》编辑部恭祝新岁!
亟待确认版面费归属稿件,敬请作者关注