基于Simulink的偏置曲柄滑块机构运动学和动力学分析
DOI:
作者:
作者单位:

中国科学院安徽光学精密机械研究所,中国科学院安徽光学精密机械研究所,中国科学院安徽光学精密机械研究所,中国科学院安徽光学精密机械研究所

作者简介:

通讯作者:

中图分类号:

TH113.2

基金项目:

浙江中烟工业有限责任公司科技项目(ZJZY2013D009)


Kinematics and dynamics analysis of offset slider-crank mechanism based on Simulink
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对工业生产中曲柄滑块机构的参数化设计要求,根据偏置曲柄滑块机构的实际物理模型,推导了机构各部分的运动学和动力学关系,并在MATLAB/Simulink环境下建立了的机构模型,通过仿真分析得到了机构各部分的运动学和动力学参数周期曲线。为相关机械产品设计过程提供了一种快速修改原始设计参数以达到理想物理性能的解决方案。

    Abstract:

    To satisfy parametric design requirements in industrial production, slider-crank mechanism model is founded in MATLAB/Simulink based on kinematics and dynamics relationships of actual physical model. Kinematics and dynamics parameters’ cycle curve is obtained via simulation analysis. This method provides a feasible solution to achieve the desired physical properties by rapid modifying design parameters of mechanical products.

    参考文献
    相似文献
    引证文献
引用本文

刘勇,王卫华,李志刚,等. 基于Simulink的偏置曲柄滑块机构运动学和动力学分析[J]. 科学技术与工程, 2014, 14(1): .
LIU Yong, WANG Wei-hua, LI Zhi-gang and. Kinematics and dynamics analysis of offset slider-crank mechanism based on Simulink[J]. Science Technology and Engineering,2014,14(1).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2013-06-26
  • 最后修改日期:2013-08-13
  • 录用日期:2013-09-12
  • 在线发布日期: 2014-01-21
  • 出版日期:
×
律回春渐,新元肇启|《科学技术与工程》编辑部恭祝新岁!
亟待确认版面费归属稿件,敬请作者关注