锥角罩和球缺罩形成EFP的速度对比研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TJ410.2

基金项目:

爆炸科学与技术国家重点实验室开放基金项目(KFJJ10-2M)


Institution on the Comparison of EFP Velocities Formed by Apex Angel Liner and Sphere Liner
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为研究药型罩形状参数对EFP速度的影响,在理论分析的基础上,设计了口径、高度及质量 均相同的锥角罩和球缺罩两种典型药型罩,利用软件对两种典型药型罩在同样的装药高度下的形成爆 炸成形弹丸的过程进行仿真,仿真计算结果与理论计算结果比较吻合。对两模型中的径向及轴向速度 进行对比分析,结果表明相同条件下药型罩形状对EFP最终速度影响不大,速度差异主要是药型罩形状 引起的装药利用率不同导致的。

    Abstract:

    To investigate the influence of liner on velocity of explosively formed penetrator (EFP),we designed two kinds of classic liner: apex angel liner and sphere liner based on analysis of associated theories , and they have same diameter、height and mass. We took advantage of the explicit finite element program to simulate the process of EFP formation, the calculation fit well to the theory. Then we compared their velocities of x-axis and y-axis and draw the conclusion: the shape of liner affect the final velocity of EFP a little and the difference between them is mainly brought about by the different availability of charge caused by liner shape.

    参考文献
    相似文献
    引证文献
引用本文

胡新印. 锥角罩和球缺罩形成EFP的速度对比研究[J]. 科学技术与工程, 2011, (23): .
huxinyin. Institution on the Comparison of EFP Velocities Formed by Apex Angel Liner and Sphere Liner[J]. Science Technology and Engineering,2011,(23).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2011-04-24
  • 最后修改日期:2011-05-15
  • 录用日期:2011-05-04
  • 在线发布日期: 2011-07-08
  • 出版日期:
×
律回春渐,新元肇启|《科学技术与工程》编辑部恭祝新岁!
亟待确认版面费归属稿件,敬请作者关注