复合压电振子的ANSYS模态分析
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TM28

基金项目:

渭南师范学院研究生专项科研项目(09YKZ008)


Analysis of Composite Piezoelectric Vibrator Based on ANSYS
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在ANSYS的软件平台上,利用有限元分析方法对复合压电圆片振子进行建模仿真实验,得到在不同边界条件下复合压电振子弯曲振动一阶模态及振幅分布图,仿真振动频率与理论计算值非常接近。相对传统振动模式分析方法,此方法更为简单、直观。

    Abstract:

    Based on ANSYS software platform,the composite piezoelectric vibrator mode is built and simulated by the finite element method. The picture of first-order modal and amplitude distribution of composite piezoelectric vibrator's bending vibration state under different boundary conditions are obtained, the simulati vibration frequency and theoretical values are very close. Compared to the traditional analysismethods ofvibrationmode, themethod is more simple, exact and intuitive.

    参考文献
    相似文献
    引证文献
引用本文

丁少虎. 复合压电振子的ANSYS模态分析[J]. 科学技术与工程, 2010, (28): .
dingshaohu. Analysis of Composite Piezoelectric Vibrator Based on ANSYS[J]. Science Technology and Engineering,2010,(28).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2010-06-21
  • 最后修改日期:2010-07-20
  • 录用日期:2010-07-26
  • 在线发布日期: 2010-09-01
  • 出版日期:
×
律回春渐,新元肇启|《科学技术与工程》编辑部恭祝新岁!
亟待确认版面费归属稿件,敬请作者关注