基于矢量拟合的直流输电线路建模
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TM71

基金项目:

国家自然科学(51567003)


DC transmission lines modeling based on vector fitting
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用矢量拟合法进行频变直流线路建模并对其建模影响因素进行分析。通过对线路进行阻抗频率特性测量,采用矢量拟合法对测量得到的离散点进行有理函数逼近,得到考虑频变特性的直流线路数学分析模型,以此为基础建立其等效电路模型,并对相关因素对建模效果的影响进行了深入分析。所建立的等效电路模型与基于实际参数的PSCAD中建立的直流线路仿真模型进行对比分析,其结果验证了该方法具有良好的精确性。

    Abstract:

    The vector fitting method is used to model the frequency-varying DC line and the influencing factors of the modeling are analyzed. Through the impedance frequency characteristic measurement of the line, the vector fitting method is used to approximate the measured discrete points with rational function, then obtain a mathematical analysis model that considers frequency-varying parameters, and establish its equivalent circuit model on this basis The established equivalent circuit model and the circuit model are compared and analyzed under PSCAD software, and the results verify the effectiveness of the method.

    参考文献
    相似文献
    引证文献
引用本文

韩昆仑,杨东睿,代宇. 基于矢量拟合的直流输电线路建模[J]. 科学技术与工程, 2021, 21(24): 10304-10309.
Han Kunlun, Yang Dongrui, Dai Yu. DC transmission lines modeling based on vector fitting[J]. Science Technology and Engineering,2021,21(24):10304-10309.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2021-03-12
  • 最后修改日期:2021-06-09
  • 录用日期:2021-04-21
  • 在线发布日期: 2021-09-01
  • 出版日期:
×
律回春渐,新元肇启|《科学技术与工程》编辑部恭祝新岁!
亟待确认版面费归属稿件,敬请作者关注