压入尺寸效应对AZ31镁合金应变率敏感性的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TB331

基金项目:

国家自然科学基金(11802199,11772215)第一作者:王在(1991—),男,汉族,山西晋城,博士研究生。研究方向:弹塑性力学。E-mail:wangzaityut@163.com。*通信作者:树学峰(1964—),男,汉族,江苏建湖,博士,教授。研究方向:弹塑性力学。E-mail:shuxuefeng@tyut.edu.cn。 (1. College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan 030024, China; 2. Shanxi Provincial General Hospital of Chinese people"s Armed Police Force, Taiyuan 030024, China)


Indentation size effect of strain rate sensitivity index of AZ31
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    本文通过纳米压入测试方法研究了镁合金在不同应变率下的力学表现。压入测试结果表明:随着应变率的增加,压入硬度值逐渐增加,而接触刚度与弹性模量几乎保持恒定;同时,随着压入深度的增加硬度表现出明显的尺寸依赖性。然后,基于Nix-Gao理论获得了AZ31镁合金的尺度无关硬度,并对其应变率敏感指数m进行了深入探究。研究表明,压入尺寸效应对材料的率敏感指数影响显著,并获得了剔除尺度影响的率敏感指数m0。

    Abstract:

    The mechanical properties of magnesium alloy under different strain rates were studied by nanoindentation. The results show that with the increase of strain rate, the hardness increases gradually, while the contact stiffness and elastic modulus remain almost constant. At the same time, the hardness showed obvious size dependence with the increase of the indentation depth. The hardness in the limit of infinite depth of AZ31 magnesium alloy was obtained based on Nix-Gao model, and the strain rate sensitivity index m was further studied. The research show that the size effect has a significant effect on the rate-sensitive index, and the rate-sensitive index m0 is obtained.

    参考文献
    相似文献
    引证文献
引用本文

王在,邱吉,冯嘉仕,等. 压入尺寸效应对AZ31镁合金应变率敏感性的影响[J]. 科学技术与工程, 2021, 21(8): 3063-3067.
Wang Zai, Qiu Ji, Feng Jiashi, et al. Indentation size effect of strain rate sensitivity index of AZ31[J]. Science Technology and Engineering,2021,21(8):3063-3067.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2020-07-02
  • 最后修改日期:2021-03-29
  • 录用日期:2020-09-17
  • 在线发布日期: 2021-04-06
  • 出版日期:
×
律回春渐,新元肇启|《科学技术与工程》编辑部恭祝新岁!
亟待确认版面费归属稿件,敬请作者关注