首页|期刊简介|投稿指南|分类索引|刊文选读|订阅指南|证明资料|样刊邮寄查询|常见问题解答|联系我们
冯颖,张庆瑾,张天阳. 异波扰流折板絮凝器对薄荷水提液的絮凝效果研究[J]. 科学技术与工程, 2020, 20(30): 12651-12656.
fengying.Study on the Flocculation Effect of Peppermint Water-Extraction Solution by the opposite folded-plate with baffle flow Flocculator[J].Science Technology and Engineering,2020,20(30):12651-12656.
异波扰流折板絮凝器对薄荷水提液的絮凝效果研究
Study on the Flocculation Effect of Peppermint Water-Extraction Solution by the opposite folded-plate with baffle flow Flocculator
投稿时间:2020-01-14  修订日期:2020-08-05
DOI:
中文关键词:  折板絮凝器 FLUENT 流场 絮凝 薄荷水提液
英文关键词:: folded-plate flocculator  FLUENT  flow field  flocculant  peppermint water-extraction
基金项目:辽宁省教育厅重点实验室基础研究项目(LZ2016002)、辽宁省“兴辽英才计划”项目(XLYC1808025)和沈阳化工大学科学研究项目(XXLJ2019004)
        
作者单位
冯颖 沈阳化工大学
张庆瑾 沈阳化工大学
张天阳 沈阳化工大学
摘要点击次数: 136
全文下载次数: 54
中文摘要:
      为了优化折板絮凝器结构以及提升折板絮凝器对薄荷水提液的絮凝效果,在普通异波折板絮凝器的基础上设计了一种异波扰流折板絮凝器。利用FLUENT对异波扰流折板絮凝器的内部流场进行模拟,分析异波扰流折板絮凝器流场内的涡旋分布,并以壳聚糖为絮凝剂,采用异波扰流折板絮凝器对薄荷水提液进行絮凝处理,以澄清层高度、沉降速度、吸光度以及絮体分形维数为指标,考察异波扰流折板絮凝器在不同进口流速下对薄荷水提液的絮凝效果。结果表明:异波扰流折板絮凝器产生的涡旋主要分布在扰流圆柱后方以及折板两侧,当进口流速为0.041 m.s-1时,异波扰流折板絮凝器对薄荷水提液的絮凝效果最好,絮体密实度最高。
英文摘要:
      : In order to optimize the structure of the folded-plate flocculator and enhance the flocculation effect of the peppermint water-extraction, on the basis of the ordinary opposite folded-plate flocculator, the opposite folded-plate with baffle flow flocculator was designed. Vortex distribution in the flow field of the opposite folded-plate with baffle flow flocculator were simulated and analyzed by FLUENT. Using chitosan as a flocculant, flocculating the peppermint water-extraction by the opposite folded-plate with baffle flow flocculators, let clear layer height, sedimentation speed, absorbance and fractal dimension of flocs index, the influence of different inlet flow rates on flocculation for the effect of flocculant by the opposite folded-plate with baffle flow flocculators were discussed. Results showed that the vortex position of the opposite folded-plate with baffle flow flocculator was distributed on both sides of the folding plate and the rear of the cylinder. The optimal flocculation inlet flow rates of the opposite folded-plate with baffle flow flocculator for extracting mint water were 0.041 m.s-1, the floc density was the highest.
查看全文  查看/发表评论  下载PDF阅读器
关闭
你是第34985142位访问者
版权所有:科学技术与工程编辑部
主管:中国科学技术协会    主办:中国技术经济学会
Tel:(010)62118920 E-mail:stae@vip.163.com
京ICP备05035734号-4
技术支持:本系统由北京勤云科技发展有限公司设计

京公网安备 11010802029091号